FAQs
HOW BIG?
Our largest laser bed is 900x1200mm with the capacity to pass longer materials through it.
HOW THICK?
Acrylic- up to 15mm
Plywood/ MDF- up to 9mm (for best results).
TURNAROUND TIMES?
We can usually turnaround projects in 3-4 working days, but this may differ for large/ complex projects.
Contact us asap with deadline details.
COST?
Quotes depend entirely on the specifics of each job – set-up, material & laser running time costs. We can only give accurate quotes once we have your designs
MATERIALS
ENGRAVE | CUT | |
---|---|---|
WOOD | X | X |
ACRYLIC | X | X |
FABRIC | X | X |
GLASS | X | |
COATED METALS | X | |
CERAMIC | X | |
DELRIN | X | X |
CLOTH | X | X |
LEATHER | X | X |
MARBLE | X | |
MATTE BOARD | X | X |
MELAMINE | X | X |
PAPER | X | X |
MYLAR | X | X |
PRESSBOARD | X | X |
RUBBER | X | X |
WOOD VENEER | X | X |
FIBREGLASS | X | X |
PAINTED METALS | X | |
TILE | x | |
PLASTIC | x | x |
CORK | x | x |
CORIAN | x | x |
ANODIZED ALUMINUM | x | |
STAINLESS STEEL | * | |
BRASS | * | |
TITANIUM | * | |
BARE METALS | * | |
* CO2 lasers will mark bare metals when coated with a metal marking solution. |